Checking Information On A Copy Job Waiting In The Queue - Sharp MX-M753U Operation Manual

CHECKING INFORMATION ON A COPY JOB WAITING
IN THE QUEUE
Detailed information can be displayed on a copy job waiting in the queue.
JOB STATUS
1
(1)
Print Job Scan to
Job Queue Sets / Progress
1 020 / 001
Copy
2 Copy 002 / 000
3 Computer01 002 / 000
4 0312345678 001 / 000
2
[Paper Select] key
If a copy job is stopped because the paper ran out, the [Paper Select] key can be pressed to change to a
different paper tray.
When the [Paper Select] key is pressed, the paper tray selection screen appears.
☞
PAPER TRAYS
Touch the key of the tray that has the size of paper that you wish to use and then touch the [OK] key. The
stopped copy job will resume.
(2)
Fax Job
Internet Fax
Status
Spool
Copying
Job Queue
Waiting 1 Complete
1
Waiting
Waiting
Detail
Priority
Stop/Delete
(3) (4)
(page 2-11)
2-137
Press the [JOB STATUS] key.
Checking job details
(1) Touch the [Print Job] tab.
(2) Change the print job status mode to [Job
Queue].
Touch this key to change modes. The selected mode will
be highlighted.
(3) Touch the key of the job that you wish to
check.
(4) Touch the [Detail] key.
The job check screen of the job selected in (3) appears.
Detail
Copy 002 / 000
Colour / B/W: B/W
Exposure: 1 3 5
A4
Paper: Paper Select
Plain
Copy Ratio: X100% Y100%
COPIER
OK
Waiting
2-Sided
Copy:
Output:
Special
Modes:
Contents