Automatic Document Feeder - Sharp MX-M753U Operation Manual

5
6
7
8
BEFORE USING THE MACHINE
Install a new stamp cartridge.
Push the stamp unit back in.
Push the stamp unit in until it clicks into place.
Close the automatic document feeder to
attach the document backplate sheet.
When the automatic document feeder is closed, the document
backplate sheet on the document glass attaches to the

automatic document feeder.

Make sure that the document backplate
sheet is firmly attached to the automatic
document feeder and then close the
automatic document feeder.
If the document backplate sheet is not firmly attached, remove
the sheet and then close the automatic document feeder again
to firmly attach the sheet.
1-76
Contents