Sharp MX-M753U Operation Manual page 127

 Installation by specifying the machine's address
When the machine cannot be found because it is not powered on or otherwise, installation is possible by entering the
name (host name) or IP address of the machine.
If the machine is being used on an IPv6 network, after you have installed the software as explained below, change the
port as explained in "
Changing to a Standard TCP/IP Port
When the software selection screen appears in step 6 of
ALL SOFTWARE)" (page 1-81), perform the steps below.
1
* The above screen appears when using the "Disc 1"
CD-ROM.
2
3
BEFORE USING THE MACHINE
" (page ).
1-107
"OPENING THE SOFTWARE SELECTION SCREEN (FOR
Click the [Printer Driver] button.
To install the PC-Fax driver, click the [PC-Fax Driver] button on
the "Disc 2" CD-ROM.
Click the [Custom installation] button.
When you are asked how the printer is
connected, select [LPR Direct Print
(Specify Address)] and click the [Next]
button.
1-86
Contents