Originals; Placing The Original; Placing Originals In The Automatic Document Feeder - Sharp MX-M753U Operation Manual

ORIGINALS

This section explains how to place originals in the automatic document feeder and on the document glass.

PLACING THE ORIGINAL

PLACING ORIGINALS IN THE AUTOMATIC DOCUMENT
FEEDER
This section explains how to place originals in the automatic document feeder.
Allowed original sizes
Minimum original size
Standard sizes
(Minimum size that can be automatically detected)
A5: 148 mm (height) x 210 mm (width)
5-1/2" (height) x 8-1/2" (width)
Non-standard sizes
(Minimum size that can be specified manually)
131 mm (height) x 140 mm (width)
5-1/8" (height) x 5-1/2" (width)
When the original is a non-standard size, see the appropriate explanation below for the mode you are using.
☞
2. COPIER "SPECIFYING THE ORIGINAL
☞
4. FACSIMILE "IMAGE SETTINGS" (page 4-47)
☞
5. SCANNER / INTERNET FAX
Allowed original weights
MX-M623U/MX-M753U/MX-M623N/
MX-M753N
To scan originals from 35 g/m
without using "Slow Scan Mode" may result in original misfeeds.
When "Slow Scan Mode" is selected, automatic 2-sided scanning is not possible.
SIZE" (page 2-28)
"IMAGE SETTINGS" (page 5-53)
1-sided copying: 35 g/m
2-sided copying: 50 g/m
2 2
to 49 g/m (9 lbs. to 14 lbs.), use "Slow Scan Mode" in the special modes. Scanning
1-44
BEFORE USING THE MACHINE
Maximum original size
Standard sizes
(Maximum size that can be automatically detected)
A3: 297 mm (height) x 420 mm (width)
11" (height) x 17" (width)
A3W size paper (12" x 18") cannot be used.
Non-standard sizes
(Maximum size that can be specified manually)
Copy mode: 297 mm (height) x 432 mm (width)
11-5/8" (height) x 17" (width)
Image send mode: 297 mm (height) x 1000 mm (width)
11" (height) x 39-3/8" (width)
2 2
to 128 g/m (9 lbs. to 34 lbs.)
2 2
to 128 g/m (15 lbs. to 34 lbs.)
Contents