Paper Trays - Sharp MX-M753U Operation Manual

PAPER TRAYS

The machine is set to automatically select a tray that has the same size of paper as the size of the placed original
(automatic paper tray selection).
If the correct paper size is not selected or you wish to change the paper size, you can select the paper tray manually.
Exposure
Auto
Copy Ratio Original
100%
Auto
A4
1
You can also touch the paper size display (A) to open the paper tray settings.
2
If the selected tray runs out of paper during a copy job and there is another tray that has the same size and type of paper,
that tray will be automatically selected and the copy job will continue.
To return to automatic paper tray selection after selecting a tray manually, press the [CLEAR ALL] key (
System Settings (Administrator): Initial Status Settings (Paper Tray)
Use this setting to change the tray that is selected by default.
Touch the [Paper Select] key.
Special Modes
2-Sided Copy
Output
File
Quick File
Paper Select
Auto
A4
Preview
Plain
Exposure
Auto
Copy Ratio Original
100%
Auto
A4
(2) Select the tray that you want to use.
(1)
(1) Touch the key of the desired tray.
(2) Touch the [OK] key.
2-11
(A)
Special Modes
2-Sided Copy
Output
File
Quick File
Paper Select
Auto
A4
Preview
Plain
You will return to the base screen and the selected tray
will be highlighted.
COPIER
).
Contents