Changing The Paper Size In Paper Tray 3 - Sharp MX-M753U Operation Manual

3
Set the paper type.
If the paper size was changed from an AB size to an inch size, or from an inch size to an AB size, or if the paper type was
4
changed, be sure to change the appropriate settings as explained in
Settings.
Loading paper in paper tray 3 is now complete.
5

CHANGING THE PAPER SIZE IN PAPER TRAY 3

Pull out paper tray 3.
1
If paper remains in the tray, remove it.
2
Load paper into the tray.
3
Gently push tray 3 into the machine.
4
Push the tray firmly all the way into the machine.
Set the paper type of the paper that was loaded in tray 3.
Be sure to change the appropriate settings as explained in
5
If you changed the paper size, be sure to change the paper size setting. An incorrect paper size setting will cause the wrong
paper to be automatically selected and may prevent printing or cause misfeeds.
BEFORE USING THE MACHINE
Gently push tray 3 into the machine.
Push the tray firmly all the way into the machine.
"Paper Tray Settings" (page 7-13) in the System
Adjust the guide plates A and B by
squeezing their lock levers and sliding
them to the paper size to be loaded.
The guide plates A and B are slidable. Adjust them to the paper
size to be loaded while squeezing their lock levers.
"Paper Tray Settings" (page 7-13) in the System Settings.
1-33
Contents