USC LPV Operator's Manual page 8

LPV WEIGH BELT SEED TREATER
DANGER! RISK OF ELECTRIC SHOCK AND ARC FLASH
Avoid any alteration to the equipment. Alterations may produce dangerous situations,
where serious injury or death may occur. This equipment shall be installed in
accordance with local installation codes and applicable regulations which should be
carefully followed in all cases. Authorities having jurisdiction should be consulted
before installations are made. Owners/operators are responsible for knowing what
requirements, hazards, and precautions exist with this equipment. Owners/operators
are responsible for informing all personnel associated with the equipment and all who
are in the general area of the equipment, the requirements, hazards, and precautions
that exist with this equipment. Electrical equipment should be installed, operated,
serviced, and maintained only by qualified personnel. A qualified person is one who
has skills and knowledge related to the construction and operation of electrical
equipment and its installation and has received safety training to recognize and avoid
the hazards involved. Only appropriately trained persons who are familiar with and
understand the contents of this manual and all other pertinent product documentation
are authorized to work on and/or with this product. Owners/operators must ensure
that all authorized persons have sufficient technical training, knowledge, and
experience and be able to foresee and detect potential hazards that may be caused by
using the product, by changing the settings and by the mechanical, electrical, and
electronic equipment of the entire system in which the product is used. All persons
working on and with the product must be fully familiar with all applicable standards,
directives, and accident prevention regulations when performing such work. Servicing
and maintaining the equipment should only occur if the equipment is deenergized and
properly locked out and tagged out. If it is unfeasible to service or maintain the
equipment while deenergized, the following standards shall be referenced to ensure
safe practices are being followed and proper PPE is being used: 29 CFR § 1910.333
and 29 CFR § 1910.137. No responsibility is assumed by USC, LLC for any
consequences arising out of the use of this material.
Page 8