Table of Contents
Advertisement
FSC1/7 and FSC1000 Operation
Use the Save Calibration Data field to assign a name to the ad-
justment data set. Then press Save.
The controller automatically appends the current date in format
YYYY_MM_DD to the name of the adjustment.
Once the submenu "Manage calibration" has been exited, the system will return to measuring mode. If the adjustment was saved, it
will be used for a subsequent measurement.
FSC1/7, FSC1000
Fig. 23 Name assignment for an adjustment
Page 24
Advertisement
Table of Contents
Need help?
Do you have a question about the FSC1/7 and is the answer not in the manual?