Pro-Form Sport RL PFRW48120.0 User Manual page 17

The display modes will appear in the following
displays:
Upper display—This display
will show the watts mode,
the strokes per minute mode,
and the resistance mode.
Center display—This dis-
play will show the time mode,
the distance mode, and the
strokes mode.
Lower display—This display
will show the calories mode.
The scan mode will be selected automatically when
you turn on the console.
To view the watts, strokes per minute, time,
distance, or strokes mode for continuous display,
press the Priority Display button repeatedly until
the desired mode is shown in the display.
To return to the scan mode, press the Priority
Display button repeatedly until the word SCAN
appears in the center display.
To reset the displays to zero, press the On/Reset
button.
Change the volume level
of the console by pressing
the volume increase and
decrease buttons.
5. When you are finished exercising, the console
will turn off automatically.
If the row bar is not moved for a few seconds, the
console will pause.
The console has an auto-off feature. If the row
bar is not moved and the console buttons are not
pressed for a few minutes, the console will turn off
automatically.
HOW TO USE THE SOUND SYSTEM
To play music or audio books through the console
sound system while you exercise, plug a 3.5 mm male
to 3.5 mm male audio cable (not included) into the
jack on the console and into a jack on your personal
audio player; make sure that the audio cable is fully
plugged in. Note: To purchase an audio cable, see
your local electronics store.
Next, press the play button on
your personal audio player.
Adjust the volume level using the
volume increase and decrease
buttons on the console or the
volume control on your personal audio player.
17