Passat 2011 ➤ , Passat Variant 2011 ➤
General body repairs, interior - Edition 01.2015
2.21
Removing and installing analogue clock
holder
2.21.1
Removing
– Switch off ignition.
– Remove Infotainment trim
– Remove dash panel insert trim
– Remove dash panel trim, front passenger side
– Remove analogue clock
Note
For reasons of clarity, some surrounding components are not or only partly shown in the illustration.
– Remove the two bolts -1- (1.5 Nm).
– Pull holder for analogue clock -2- out of dash panel.
32
Rep. gr.68 - Interior equipment
⇒ page 12
.
⇒ page 31
.
⇒ page 30
⇒ page 33
.
.