Table of Contents
Advertisement
Position support
2
of jack
4
#
port point 1.
Turn crank
3
clockwise until support
#
sits completely on jack support point
the base of the jack lies evenly on the
ground.
Turn crank
3
until the tire is raised a maxi‐
#
mum of 1.2 in (3 cm) from the ground.
Loosen and remove the wheel (
/
#
Removing a wheel
Requirements:
The vehicle is raised (
R
* NOTE Mercedes-AMG vehicles
Observe the notes in the Supplement.
#
You could otherwise fail to recognize
dangers.
When changing a wheel, avoid applying any force
to the brake discs, as this could impair the level
of comfort when braking.
* NOTE Damage to threading from dirt on
wheel bolts
on jack sup‐
Do not place wheel bolts in sand or on
#
a dirty surface.
2
1
and
Unscrew the uppermost wheel bolt com‐
#
pletely.
page 381).
page 379).
/
Screw alignment bolt
#
instead of the wheel bolt.
Unscrew the remaining wheel bolts com‐
#
pletely.
Remove the wheel.
#
Install the new wheel (
#
Installing a new wheel
Requirements:
The wheel is removed (
R
Wheels and tires 381
1
into the thread
page 381).
/
page 381).
/
Hide quick links:
Advertisement
Table of Contents
