Mercedes-Benz C-Class Convertible 2021 Operator's Manual page 112

110 Light and visibility
Switching on high beam
Turn the light switch to the L or Ã
#
position.
Push the combination switch beyond the
#
point of resistance in the direction of arrow
1.
When the high beam is activated, the L
indicator lamp for low beam will be deactiva‐
ted and replaced by the K indicator lamp
for high beam.
Switching off high beam
Move the combination switch back to its
#
starting position.
High-beam flasher
Pull the combination switch in the direction
#
of arrow 3.
Turn signal light
To indicate briefly: push the combination
#
switch briefly to the point of resistance in the
direction of arrow 2 or 4.
The corresponding turn signal light will flash
three times.
To indicate permanently: push the combi‐
#
nation switch beyond the point of resistance
in the direction of arrow 2 or 4.
Vehicles with Active Lane Change Assist:
A turn signal indicator activated by the
R
driver may continue to operate for the
duration of the lane change.
If the driver indicated directly beforehand
R
but a lane change was not immediately
possible, the turn signal indicator may
activate automatically.
Activating/deactivating the hazard warning
lights
Press button 1.
#
The hazard warning lights will switch on auto‐
matically if:
The airbag has been deployed.
R