Table of Contents
Advertisement
338 Breakdown assistance
Affix part
1
of the TIREFIT sticker to the
#
instrument cluster within the driver's field of
vision.
Affix part
2
of the TIREFIT sticker near the
#
valve on the wheel with the faulty tire.
Pull plug
4
with the cable and hose
#
of the tire inflation compressor housing.
Push the plug of hose
#
tire sealant bottle
1
Place tire sealant bottle
#
into recess
2
of the tire inflation compres‐
sor.
Remove the cap from valve
#
tire.
Screw filling hose
8
#
Insert plug
4
into a 12 V socket in your
#
vehicle.
5
out
Switch on the ignition.
#
5
into flange
6
of
Press on and off switch
#
until the plug engages.
tion compressor.
The tire inflation compressor is switched on.
1
head downwards
The tire is inflated. First, tire sealant is pum‐
ped into the tire. The pressure may briefly
rise to approximately 500 kPa (5 bar/73 psi).
Do not switch off the tire inflation compres‐
sor during this phase!
Let the tire inflation compressor run for a
#
maximum of ten minutes.
The tire should then have attained a tire
pressure of at least 200 kPa (2.0 bar/
29 psi).
If tire sealant leaks out, make sure you clean the
affected area as quickly as possible. It is prefera‐
7
on the faulty
ble to use clean water.
If you get tire sealant on your clothing, have it
onto valve 7.
cleaned as soon as possible with perchloroethy‐
lene.
3
on the tire infla‐
Hide quick links:
Advertisement
Table of Contents
