Table of Contents
Advertisement
Fold cover
1
up in the direction of the
#
arrow.
Slide cover
2
of positive clamp
#
jump-starting connection point in the direc‐
tion of the arrow.
Starting assistance
Connect positive contact
3
on your vehicle
#
to the positive terminal of the donor battery
using the jumper cable. Always begin with
positive clamp
3
on your own vehicle first.
Start the engine of the donor vehicle and run
#
it at idling speed.
Connect the negative terminal of the donor
#
battery to ground point
using the jumper cable. Begin with the donor
battery first.
Start the engine of your own vehicle.
#
Let the engines run for several minutes.
#
Before disconnecting the jumper cables,
#
switch on an electrical consumer in your own
vehicle, e.g. the rear window heater or the
lighting.
When the starting assistance procedure is com‐
plete:
3
on the
First, remove the jumper cables from ground
#
point
4
and the negative terminal of the
donor battery, then from positive contact
and the positive terminal of the donor bat‐
tery. Begin each time with the contacts on
your own vehicle first.
After removing the jumper cables, close
#
cover
2
of positive contact 3.
Close cover 1.
#
Breakdown assistance 345
4
of your vehicle
3
Hide quick links:
Advertisement
Table of Contents
