Advertisement
¦
¦ topic 4.5.1.
¦
¦
¦
¦ If a double disk drive failure exits, the 3514 must be set
¦
¦ offline before the command is repeated.
¦
¦
¦
¦ The problem recovery procedure that you came from should
¦
¦ have instructed you to set the unit offline before this
¦
¦ command was performed.
¦
¦ procedure that sent you here and follow the instructions to ¦
¦
¦ set the unit offline, then repeat the command.
+----------+-------------------------------------------------------------¦
¦ F4
¦ Command cannot be performed, a power module is switched
¦
¦ off.
¦
¦ Find the location of the power module that has been
¦
¦ switched off using the command 0 3 under "Quick Status
¦
¦ Commands" in topic 2.5.1.
¦
¦ command 4 3 9 x as described in "Power Module" in
¦
¦ topic 4.5.5.
¦
¦
¦
¦ If the 0 3 command displays an x in the position that was
¦
¦ being exchanged by the 4 3 9 x command, see return code F5. ¦
¦
¦
¦
¦ Repeat the command.
+----------+-------------------------------------------------------------¦
¦ F5
¦ Power module cannot be found.
¦
¦
¦
¦ Note:
For this return code only, seat the power module
¦
¦ with power on.
¦
¦ power module.
¦
¦
¦
¦ Reseat the power module and repeat the command, or swap it
¦
¦ with a new power module and repeat the command.
+----------+-------------------------------------------------------------¦
¦ F5
¦ Power module cannot be found.
¦
¦ Reseat the power module and repeat the command, or install
¦
¦ a new power module and repeat the command.
+----------+-------------------------------------------------------------¦
¦ F6
¦ Command cannot be performed, a drive format is in progress. ¦
¦
¦ Repeat the command after the format is complete.
¦
¦
¦
¦ Note:
The format can take up to 40 minutes to complete.
+----------+-------------------------------------------------------------¦
¦ F7
¦ Command cannot be performed, a data reallocation is in
¦
¦ progress.
¦
¦ Repeat the command after the data reallocation is complete. ¦
¦
¦
¦
¦ Note:
The data reallocation can take up to 40 minutes to
¦
¦ complete.
+----------+-------------------------------------------------------------¦
¦ F8
¦ Command cannot be performed, a data rebuild is in progress. ¦
¦
¦ Repeat the command after the data rebuild is complete.
¦
¦
¦
¦ Note:
The data rebuild can take up to 40 minutes to
¦
¦ complete.
+----------+-------------------------------------------------------------¦
¦ F9
¦ Command cannot be performed, a data resynchronization is in ¦
¦
¦ progress.
¦
¦ Repeat the command after the data resynchronization is
¦
¦ complete.
¦
¦
¦
¦ Note:
The data resynchronization can take up to 40 minutes ¦
¦
¦ to complete.
+----------+-------------------------------------------------------------¦
¦ FB
¦ Disk drive not in the configuration record.
¦
¦ This command cannot be performed when disk drives are
¦
¦ present that are not in the 3514 configuration.
+----------+-------------------------------------------------------------¦
¦ FC
¦ Wrong disk drive was selected to be exchanged when multiple ¦
¦
¦ disk drives are broken.
¦
¦ The other failing disk drive must be exchanged first.
+----------+-------------------------------------------------------------¦
¦ FD
¦ A data rebuild is in progress and a second disk drive has
¦
¦ failed.
¦
¦ Find the most recent URC in the URC log (see "Using the
¦
¦ 3514 Unit Reference Code (URC) Error Log" in topic 2.6).
¦
¦
¦
¦ Go to "Unit Reference Code Table" in topic 3.2.
+----------+-------------------------------------------------------------¦
¦ FE
¦ Command cannot be performed with multiple broken drives;
¦
¦ the 3514 is protected and online
¦
¦ Find the most recent URC in the URC log (see "Using the
¦
¦ 3514 Unit Reference Code (URC) Error Log" in topic 2.6).
¦
¦
¦
¦ Go to Chapter 1, "Always Start Here" in topic 1.0.
3514 Service Information
Control Panel Command Return Code Information
Return to the problem recovery
Exchange the power module using
Do not switch off power to the 3514 or
¦ Copyright IBM Corp. 1992, 1993
3.4 - 3
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
Advertisement
