IBM PS/2 3514 Service Information page 191

4.5.16 Adapter Card
Use the following procedure to exchange the host adapter card.
1. Set the 3514 Power switch to the Off position.
2. Use the system unit Quick Reference Manual to remove and install the
adapter card.
3. Set the 3514 Power switch to the On position.
4. Run the 3514/A Array Adapter diagnostics. (See the 3514 Quick
Reference Manual, SA21-9613 for information on how to run
diagnostics.)
Did the diagnostics run without error?
Yes No
go to "Starting Problem Analysis" in topic 1.2.
End of procedure.
3514 Service Information
Adapter Card
¦ Copyright IBM Corp. 1992, 1993
4.5.16 - 1