Advertisement
PICTURE 255
15. Install the replacement disk drive data cable:
a.
Disk drive connector
b.
Controller card connector
PICTURE 256
16. Attach the front EMC shield.
Note:
Engage both thumbscrews before you tighten either screw.
PICTURE 257
17. Restore the control panel to operating position and tighten screw
PICTURE 258
18. Install the front cover (see "Front Cover Removal or Installation
Procedure" in topic 4.3).
19. Verify that the 3514 is operating correctly.
in topic 4.5.17.
End of procedure.
3514 Service Information
Disk Drive Data Cable
1
and
2 .
3 .
See "Verifying a Repair"
¦ Copyright IBM Corp. 1992, 1993
4.5.3 - 3
1 :
Advertisement
