Questions/Answers; Cleaning And Storage - Cuisinart CH4DCE Instructions Manual

8 QUESTIONS/ANSWERS

QUE FAIRE SI:
My mini-preparer cuts
out while I am using it?
The ingredients aren't
chopped enough, there
are still pieces?
Food is stuck to the side?
Liquid ingredients are not
mixing properly?
My mini processor
doesn't start?
22
13_CH4DCE_IB.indd 22
REPONSES
- Make sure that the lid
is secure
- The motor overheat
safety mechanism is in
use Allow the device
to cool for 10 to 15
minutes before swit-
ching it on again
Make sure you don't
overload the work bowl
Use the reversible
motor by pressing
alternately the CHOP
and the GRIND buttons
This will distribute the
food more evenly in the
bowl
These should only
be added when the
appliance is running for
better mixing
Check that the work
bowl and lid are secu-
rely locked into place

9 CLEANING AND STORAGE

• Keep the appliance unplugged when it is not in use
IMPORTANT: The blade must be kept out of the
reach of children.
• All parts, except the housing base, are dishwasher
safe We recommend washing them on the upper
rack of the dishwasher If they are placed on the
lower rack, the amount of hot water could, over time,
damage the bowl, the lid and the accessories Place
the bowl upside down
• If you wash the blade by hand, use extreme care, the
blade is very sharp Do not leave it in soapy water as it
may disappear from sight
• Take extra care when loading and unloading the
blade in the dishwasher
• To make cleaning easier, rinse the work bowl, lid and
blade immediately after use so food won't dry on
them
• Chopping certain foods (e g spices and sugar) may
scratch, cloud or discolour the work bowl
• Do not use abrasive cleaners on the housing base
Simply wipe it with a damp cloth and then dry it
• Apply cleaning agents to the cloth, not the housing
base
13/05/16 11:52