Chapter 3 Parameters Setup Via Mobile; Android App Installation - RadioLink T8S User Manual
8-channel remote controller
Hide thumbs
Also See for T8S:
- Instruction manual (21 pages) ,
- User manual (19 pages) ,
- User manual (19 pages)
Table of Contents
Advertisement
6. Click "START" and the process bar becomes green. When the green bar goes to the end and shows PASS,
the firmware is upgraded with success.
7. When upgrade with success, close the software and T8S will make three DEE sounds.
3.1 Android APP Installation
Scan
the
QR
http://www.radiolink.com.cn/firmware/transmitter/RadiolinkT8S_BLE_502_2019
1106.apk
to download the android app to setup T8S parameters by Bluetooth
connection.
Note T8S parameters setup APP is only available on Android mobiles.
3.2 Connection
1. When the installation of parameter setup app
is complete, short press the power button to turn
on T8S
2. Click
to enter the APP, a message
will pop out to ask for permission to turn on the
Bluetooth function
Chapter 3 Parameters Setup via Mobile
code
on
the
right
or
click
6
Radiolink Electronic Ltd
www.radiolink.com
- Quick Links:
- Chapter 4 T8S Parameters Setup Via...
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the T8S and is the answer not in the manual?