Table of Contents
Advertisement
Ensure Safety Before Rising from or Leaving
Operator's Seat
• Before rising from the operator's seat to open / close either
side window or to adjust the seat position, be sure to first
lower the front attachment to the ground and then move
the loader control lever lock to the LOCK position. Failure to
do so may allow the machine to unexpectedly move when
a body part unintentionally comes in contact with a control
lever, possibly resulting in serious personal injury or death.
• Before leaving the machine, be sure to first lower the front
attachment to the ground and then move the loader
control lever lock to the LOCK position. Turn the key
switch OFF to stop the engine.
• Before leaving the machine, close all windows, doors, and
access covers and lock them up.
Fasten Your Seat Belt
• If the machine should overturn, the operator may become
injured and / or thrown from the cab. Additionally the
operator may be crushed by the overturning machine,
resulting in serious injury or death.
• Prior to operating the machine, thoroughly examine
webbing, buckle and attaching hardware. If any item is
damaged or worn, replace the seat belt or component
before operating the machine.
• Be sure to remain seated with the seat belt securely
fastened at all times when the machine is in operation to
minimize the chance of injury from an accident.
• We recommend that the seat belt be replaced every four
years regardless of its apparent condition.
SAFETY
S-7
SA-237
Advertisement
Table of Contents
