Field Of Application Of The Product; Safety Notes - Phoenix Contact THERMOMARK CARD 2.0 User Manual

THERMOMARK CARD 2.0
6 / 44
PHOENIX CONTACT
1.3

Field of application of the product

The THERMOMARK CARD 2.0 is a thermal transfer printer for the industrial sector. The
printer can be used to print on plastic labels in card and sheet format.
With thermal transfer printing, heat causes the color layer of an ink ribbon to be transferred
onto the card material.
The result of the print depends essentially on the suitable combination of material and ink
ribbon. A low-quality ink ribbon can lead to premature wear on the printhead and result in a
poor print image. Use only print materials from Phoenix Contact.
You may only use the printer with Phoenix Contact materials which are intended for the
THERMOMARK CARD 2.0. The use of other materials can result in damage to the unit.
Do not use the device at locations where children may be present.
1.4

Safety notes

Life-threatening danger from mains voltage
Never open the housing of the device.
Risk of injury
If you operate the device with the cover open, rotating parts are exposed. The moving parts
can catch on loose clothing, jewelry or hair.
The device has openings that are large enough for a child's finger to fit through. Do not use
the device at locations where children may be present.
Danger of crushing from cover
Make sure you do not crush yourself with the cover.
Risk of burns
During operation, the printhead can get hot. Allow the printhead to cool down before you
change the ink ribbon or clean the printhead line.
Hazard to operational safety
Incorrect operation or modifications to the device can endanger your safety or damage the
device. Do not repair the device yourself. If the device is defective, please contact
Phoenix Contact.
108770_en_01