Printing Via Ftp; Ftp Login; Sending Print Data Via Ftp - Phoenix Contact THERMOMARK CARD 2.0 User Manual

THERMOMARK CARD 2.0
26 / 44
PHOENIX CONTACT
3.4

Printing via FTP

With the File Transfer Protocol (FTP), you can manage and transfer files in the network via
the Ethernet or WLAN interface. For printer management, you require an FTP program (FTP
client) which supports the "binary" transfer mode. The printer acts as an FTP server.
The FTP printer management has three functions:
– Direct printing by copying from JScript files
– Management of the storage media installed on the label printer
– Firmware update
3.4.1

FTP login

To establish an FTP connection, the client must be logged in to the server. The type of login
depends on the client. You must enter the following information in any case:
– IP address of the printer
– User name and password
Access to the printer management functions depends on the user name:
Table 3-2 Default passwords
Function
Printing via FTP
Access to storage medium via FTP
Firmware update via FTP
1
Change the passwords via the printer menu (see
After logging in, you can access the FTP server in the same way you would access a Win-
dows folder.
3.4.2

Sending print data via FTP

You can print the print data in JScript format via an FTP connection.
• Establish an FTP connection to the printer with the user name ftpprint and the specified
password (default: print). An empty folder of the FTP server is displayed.
• Copy the label file in JScript format into the folder of the FTP server.
Printing of the label file starts immediately. After the print job is complete, the associ-
ated file is automatically deleted.
• End the FTP connection.
User name
ftpprint
ftpcard
ftpadmin
page 23)
1
Default password
print
card
admin
108770_en_01