THERMOMARK CARD 2.0
UCT...
16 / 44
PHOENIX CONTACT
2.4.2
Inserting the magazine
Suitable material
–
Magazine for:
–
UCT material: THERMOMARK CARD UCT-MAG 1
–
UM material: THERMOMARK CARD UM-MAG 1
–
US material: THERMOMARK CARD US-MAG 1
CAUTION: Danger of crushing
When the compartment is moved in and out, make sure that no parts of the body or ob-
jects are within the working range of the compartment.
•
Move the compartment out. To do this, touch the
•
Place the magazine into the locators in the compartment.
•
Lower the magazine until it is caught by the pins and rests on the compartment.
•
Close the compartment using the
UM...
Figure 2-7
Inserting the magazine
button on the display.
button on the display.
US...
108770_en_01