108770_en_01
2.3.1
Connecting the mains cable
The THERMOMARK CARD 2.0 is equipped with a wide range power supply unit for AC volt-
ages between 100 V and 240 V.
To comply with the electromagnetic compatibility regulations, you must attach the included
ferrite sleeve to the mains cable.
Figure 2-4
Connecting the mains cable
•
Attach the supplied ferrite sleeve to the mains cable.
•
Insert the mains cable into the socket of the device.
•
Connect the mains cable to a socket.
Starting up the printer
11 / 44
PHOENIX CONTACT