Table of Contents
Advertisement
Modbus Server – DALI
TM
Intesis
Finally, click on button 'Connect' in order to establish connection. Bar at the bottom in MAPS main window will
become green, switching from 'Not Connected' to 'Connected'.
Now go back to 'Configuration' tab of MAPS, and click on button 'Commissioning':
Commissioning window will appear:
If having product version / template project supporting 2 DALI channels, channel to commission must be selected
between 'Port A' (top of the device) or 'Port B' (bottom of the device). In case of version supporting single DALI
channel, no selection is possible.
Also, if ballasts have been added to the configuration (see previos section 'ECG declaration in project') a list of
ballasts will appear in Configured ECG.
© HMS Industrial Networks S.L.U - All rights reserved
This information is subject to change without notice
A.6
Figure
DALI commissioning button
A.7
Figure
DALI commissioning window
User Manual r1.3 EN
URL
https://www.intesis.com
36 / 39
Advertisement
Table of Contents
