Table of Contents
Advertisement
Modbus Server – DALI
TM
Intesis
4 Set-up process and troubleshooting
Pre-requisites
It is necessary to have the Modbus RTU or TCP master/client device (BMS side device) operative and properly
connected to the corresponding port of the gateway. It is also required to have a DALI installation connected to the
gateway, in its respective dali port/s.
Connectors, connection cables, PC for the usage of the Configuration Tool and other auxiliary material, if needed,
are not supplied by Intesis for this standard integration.
Items supplied with this product for this integration are:
•
Intesis gateway.
•
Link to download the configuration tool.
•
USB Console cable to communicate with Intesis.
•
Product documentation.
Intesis MAPS. Configuration & monitoring tool for Intesis
4.2.1 Introduction
Intesis MAPS is a Windows
generation gateways.
The installation procedure and main functions are explained in the Intesis MAPS User Manual. This document can
be downloaded from the link indicated in the installation sheet supplied with the Intesis device or in the product
website at
www.intesis.com
In this section, only the specific case of DALI to Modbus will be covered.
Please check the Intesis MAPS user manual for specific information about the different parameters and how to
configure them.
4.2.2 Connection
To configure the Intesis connection parameters press on the Connection button in the menu bar.
© HMS Industrial Networks S.L.U - All rights reserved
This information is subject to change without notice
®
compatible software developed specifically to monitor and configure Intesis new
Figure 4.1 MAPS connection
User Manual r1.3 EN
URL
https://www.intesis.com
25 / 39
Advertisement
Table of Contents
