Table of Contents
Advertisement
Modbus Server – DALI
TM
Intesis
4.2.6 Diagnostic
To help integrators in the commissioning tasks and troubleshooting, the Configuration Tool offers some specific tools
and viewers.
In order to start using the diagnostic tools, the connection with the Gateway must be stablished.
The Diagnostic section is composed by two main parts: Tools and Viewers.
•
Tools
Use the tools section to check the current hardware status of the box, log communications into
compressed files to be sent to the support, change the Diagnostic panels' view or send commands
to the gateway.
•
Viewers
In order to check the current status, viewer for the Internal and External protocols are available. It is
also available a generic Console viewer for general information about communications and the
gateway status. Finally a Signals Viewer to simulate the BMS behavior or to check the current values
in the system.
More information about the Diagnostic section can be found in Intesis MAPS user manual for Intesis Modbus Server
Series.
© HMS Industrial Networks S.L.U - All rights reserved
This information is subject to change without notice
Figure 4.5 Diagnostic
User Manual r1.3 EN
URL
https://www.intesis.com
29 / 39
Advertisement
Table of Contents
