Ecg Declaration In Project - HMS Networks Intesis INMBSDAL0640000 User Manual

Modbus Server – DALI
TM
Intesis

ECG declaration in project

Once new project has been created, ballasts can be added to the configured project, without the need of scanning
them in bus.
As mentioned above, this allows defining its configuration parameters (preset values, groups, scenes, ...) before
having actual access to the installation.
To do so, go to the 'Configuration' tab of Intesis, and select the 'DALI' section.
In it, choose the channel where you want to instantiate the ballasts (A or B are possible in case of having the product
version supporting 2 DALI channels).
With suitable DALI channel selected, enter in 'Add ECG(s)' field the number of ballasts/ECGs to instantiate, and click
button Add.
Number of desired devices will appear:
© HMS Industrial Networks S.L.U - All rights reserved
This information is subject to change without notice
A.2
Figure DALI ECGs instantiation
A.3
Figure Instantiation of DALI ECGs
User Manual r1.3 EN
URL https://www.intesis.com
34 / 39