Table of Contents
Advertisement
3.6.2.11 USB Configuration
The USB Configuration menu helps read USB information and configures USB settings.
Item
USB transfer time-out
Device reset time-out
Device power-up delay
Mass Storage Devices
Options
1 sec
5 sec
The time-out value for Control, Bulk, and Interrupt
10 sec
transfers.
20 sec[Default]
10 sec
20 sec[Default]
USB mass storage device Start Unit command
30 sec
time-out.
40 sec
Maximum time the device will take before it properly
reports itself to the Host Controller. 'Auto' uses
Auto[Default]
Manual
default value: for a Root port it is 100ms, for a Hub
port the delay is taken form Hub descriptor.
Auto[Default]
Mass storage device emulation type. 'AUTO'
Floppy
enumerates devices according to their media format.
Forced FDD
Optical drives are emulated as 'CDROM', drives with
Hard Disk
no media will be emulated according to a drive type.
CD-ROM
User's Manual
Description
ERX-H110KP User's Manual 57
Advertisement
Table of Contents
