Table of Contents
Advertisement
Flow Control
VT-UTF8 Combo Key Support
Recorder Mode
Resolution 100x31
Putty KeyPad
3.6.2.8 Intel TXT Configuration
None[Default]
Hardware RTS/CTS
Disabled
Enabled[Default]
Disabled[Default]
Enabled
Disabled[Default]
Enabled
VT100[Default]
LINUX
XTERMR6
SCO
ESCN
VT400
Flow control can prevent data loss from
buffer overflow. When sending data, if the
receiving buffers are full, a 'stop' signal can
be sent to stop the data flow. Once the
buffers are empty, a 'start' signal can be
sent to re-start the flow. Hardware flow
control uses two wires to send start/stop
signals.
Enable VT-UTF8 Combination Key Support
for ANSI/VT100 terminals.
With this mode enabled only text will be
sent. This is to capture Terminal data.
Enables or disables extended terminal
resolution.
Select FunctionKey and KeyPad on Putty.
ERX-H110KP User's Manual 53
User's Manual
Advertisement
Table of Contents
