Table of Contents
Advertisement
ERX-H110KP User's Manual
3.6.2.7.1 COM1
Item
Terminal Type
Bits per second
Data Bits
Parity
Stop Bits
52 ERX-H110KP User's Manual
Option
VT100
VT100+[Default]
VT-UTF8
ANSI
9600
19200
38400
57600
115200[Default]
7
8[Default]
None[Default]
Even
Odd
Mark
Space
1[Default]
2
Description
Emulation: ANSI: Extended ASCII char set.
VT100: ASCII char set. VT100+: Extends
VT100 to support color, function keys, etc.
VT-UTF8: Uses UTF8 encoding to map
Unicode chars onto 1 or more bytes.
Selects serial port transmission speed. The
speed must be matched on the other side.
Long or noisy lines may require lower
speeds.
Data Bits.
A parity bit can be sent with the data bits to
detect some transmission errors. Even:
parity bit is 0 if the num of 1's in the data
bits is even. Odd: parity bit is 0 if num of 1's
in the data bits is odd. Mark: parity bit is
always. 1. Space: Parity bit is always 0.
Mark and Space Parity do not allow for
error detection. They can be used as an
additional data bit.
Stop bits indicate the end of a serial data
packet. (A start bit indicates the beginning).
The standard setting is 1 stop bit.
Communication with slow devices may
require more than 1 stop bit.
Advertisement
Table of Contents
