Creative Playthings SH922-800Q Assembly Manual

MODEL #SH922-800Q
ASSEMBLY MANUAL
D
SPECIAL NOTES
• Please review your original Playset Assembly Manual and your
Owners Manual before assembly of your Ramp.
• Provide a soft surface free from obstructions 6' out from the base of
the Ramp. See your original Playset Instructions for recommended
play surfaces.
• It is extremely important that the ramp be located in an area that does
not create a conflict in play such as swings or other activities.
• Replace any bolts or weld nuts that become stripped or cross
threaded.
All hardware on this set is specially coated for corrosion resistance. If non-Creative Play-
things hardware is used, it MUST be galvanized or stainless steel.
B
A
C
RAMP FOR 5' PLATFORM
WARNING: The rope on this
accessory must be kept tight.
If a head-sized loop can be made, it
must be retightened.
Installers must alert customers and pass on
this installation guide.
Parents or others who supervise play on
this accessory should check the rope before
each play session. A loose rope can cause
strangulation. If the rope is loose, tighten it
at the lower connection and re-tie the knot,
as shown in step 3 of this installation guide.
SH922-800Q Premium Pine Ramp
A (1) 40419-102
B (1) 40295-100
C (2) 36515-102
D (2) 14161-400
For hardware, see page two.
COMPONENTS
Ramp Assembly - Pine
Climbing Rope Assembly
Stakes
Access Ladder Bracket