1. Manuals
  2. Brands
  3. Creative Playthings Manuals
  4. Play Sets & Playground Equipment
  5. PINE SKYBOX SH901-700
  6. Assembly manual

Creative Playthings PINE SKYBOX SH901-700 Assembly Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
PIne SKyboX
Model #SH901-700
ASSeMbly MAnuAl
illustration #1
Please read the owner's manual before assembling your play set.
It provides additional information on the care and use of your play
set. you must carefully read the entire instruction manual before pro-
ceeding with the assembly or use of your new play set.
All hardware on this set is specially coated for corrosion
resistance. If non-Creative Playthings hardware is used, it
MuSt be galvanized or stainless steel.
Creative Playthings takes great care to design its products with your
child's safety in mind. However, only with careful supervision and
proper safety instructions, can you be assured of safe play time on
any product designed for children.

Advertisement

Table of Contents
loading

Related Manuals for Creative Playthings PINE SKYBOX SH901-700

Summary of Contents for Creative Playthings PINE SKYBOX SH901-700

  • Page 1 If non-Creative Playthings hardware is used, it MuSt be galvanized or stainless steel. Creative Playthings takes great care to design its products with your child’s safety in mind. However, only with careful supervision and proper safety instructions, can you be assured of safe play time on...

  • Page 2: Assembly Safety

    • until assembly is complete, do not let your children use the play set. • never fasten anything not approved by Creative Playthings to your play set. Accessories or items not ap- proved by Creative Playthings include; dog runs, clothes lines, electrical devices, or bird feeders etc.
  • Page 3 Safe play area using recommended ground cover. Landscape Timbers 6' from WHICHEVER play structure. illustration #2 IS GREATER A fAll onto A HARd SuRfACe Could ReSult In SeRIouS InjuRy. Pine Skybox Page 3 © Copyright 2005, Creative Playthings 19690-100 Rev J (06-16)

  • Page 4: Hardware Bag Contents

    Lag Screw - 5/16 x 4" 17036-2002 Lag Screw - 5/16 x 5" 14161-400 Access Ladder bracket We have packaged more hardware than is required for assembly. Pine Skybox Page 4 © Copyright 2005, Creative Playthings 19690-100 Rev J (06-16)

  • Page 5: Pre Assembly Information

    PRe ASSeMbly InfoRMAtIon CReAtIVe PlAytHInGS PlAy SetS uSe A feW StAndARd ConneCtIonS. beCoMInG fAMIlIAR WItH tHeSe ConneCtIonS WIll SIMPlIfy ASSeMbly And InSuRe A SAfeR PlAy PRoduCt foR youR CHIldRen. Hex bolt & Weld nut Assembly Procedure: illustration #3 illustration #4...
  • Page 6 Assembly PlAy Set VIeW k, L, o & P are used only on a Skybox connected to a gym with a tent roof. illustration #9 Pine Skybox Page 6 © Copyright 2005, Creative Playthings 19690-100 Rev J (06-16)

  • Page 7: Component Parts

    32489-102 Wall Slat, narrow - 5/4 x 4 x 23-1/2" Q* 1 ea 50350-700 hardware bag - Skybox 2005 - SP CC 2 ea 15132-400 Access Ladder Step Pine Skybox Page 7 © Copyright 2005, Creative Playthings 19690-100 Rev J (06-16)

  • Page 8: Maintenance Instructions

    Tighten as required and specified in these instructions. do not over tighten. • Check structure twice monthly during usage for any evidence of deterioration. if upon inspection, hardware has sharp edges, rusted or structural pieces have signs of premature failure; replace them through Creative Playthings Customer Service.

  • Page 9: Assembly Note

    The Wall Slats will be re-used. When mounting the Skybox to a Gym that is to have a Clubhouse or Fun deck do noT remove Sandbox end, see page 19. Pine Skybox Page 9 © Copyright 2005, Creative Playthings 19690-100 Rev J (06-16)
  • Page 10 Post. Fasten the remaining Sandbox end (AA) to the Corner Posts (d) using four 5/16 x 4" hex bolt Assemblies. Counter-bored illustration #13 Pine Skybox Page 10 © Copyright 2005, Creative Playthings 19690-100 Rev J (06-16)

  • Page 11: Step 6 - Platform Support

    Post can be used to gauge the correct note: The Right Platform Side has position of the Platform Support (Z). illustration #16 been omitted for clarity. Pine Skybox Page 11 © Copyright 2005, Creative Playthings 19690-100 Rev J (06-16)
  • Page 12 Corner Posts using one 5/16 x 3" Lag Screw and Flat washer in each Angle brace (A). note: The Stringers have been omitted from the illustration for clarity. illustration #19 Pine Skybox Page 12 © Copyright 2005, Creative Playthings 19690-100 Rev J (06-16)
  • Page 13 Right Post extension (i) to the Gym Corner Post using two 6" hex bolt Assemblies. Repeat with the Left Post externsion (h) and the left rear gym Corner Post. illustration #22 Pine Skybox Page 13 © Copyright 2005, Creative Playthings 19690-100 Rev J (06-16)
  • Page 14 SteP 14 - long end Wall Support: Fasten the Long end Wall Support (u) to the Corner Posts using two 5/16 x 4" hex bolt Assemblies, as shown. illustration #25 Pine Skybox Page 14 © Copyright 2005, Creative Playthings 19690-100 Rev J (06-16)
  • Page 15 (v) and the Platform Support (Z) using two 2-1/2" hex bolt Assemblies. Secure the bottom of the Tent Post (L) using two #8 x 2-1/2" Wood Screws from below the Gym Platform boards. illustration #27 Pine Skybox Page 15 © Copyright 2005, Creative Playthings 19690-100 Rev J (06-16)
  • Page 16 Access Ladder Assembly using four #8 x 1-5/8" Screws. Leave a space of 3-1/4" between the top of the lower step and the bottom of the Ladder Slat. illustration #30 Pine Skybox Page 16 © Copyright 2005, Creative Playthings 19690-100 Rev J (06-16)
  • Page 17 Platform Support using two 5/16 x 2" hex bolt Assemblies. Fasten the base of the Access Ladder Assembly to the Gym Platform boards using two #8 x 1-5/8" Wood Screws. illustration #33 Pine Skybox Page 17 © Copyright 2005, Creative Playthings 19690-100 Rev J (06-16)
  • Page 18 Secure the Tent Pipe to the Tent Support using one #8 x 2-1/2" Wood Screw. Repeat with the other three ends of the Tent Pipes. illustration #35 Pine Skybox Page 18 © Copyright 2005, Creative Playthings 19690-100 Rev J (06-16)
  • Page 19 Continue installation of both Skybox and Clubhouse (or Play Floor) as shown in the respective manuals. if installing a Gym Sandbox Clubhouse, see the special instructions at the bottom of the next page. Pine Skybox Page 19 © Copyright 2005, Creative Playthings 19690-100 Rev J (06-16)
  • Page 20 4-3/8" Save all instruction sheets and receipts in case it becomes necessary to con- tact Creative Playthings for warranty service and/or part replacement. the warranty can be found in your owner’s Manual. Please fill out the warranty card on the back of your owners manual. your completed warranty card will allow us to quickly process warranty claims.

Table of Contents