Viewing Current Date And Time; Setting The Date And Time - ADT Security Manager 3000 User Manual

The system lets you view its time and date setting.
+[#] + [6] [3]
(Security Code)
OR, press the function key (A, B, C, or D) for viewing
current date and time, if programmed.
A typical time/date display is shown.
The display will remain on for about 30 seconds.
"A "
If one of the above keys has been programmed for the date/time
display feature, place a check mark in the box beneath that key.
You can set the time and date by doing the following:
1. +[#] + [6] [3]
(Security Code)
2. Press [ ] when the time/date is displayed.
A cursor appears under the first digit of the hour.
To move cursor ahead, press [ ]. To go back, press [#].
Enter the 2-digit hour setting.
Enter the 2-digit minute setting.
Press [1] for PM or [2] for AM.
Enter the last two digits of the current year.
Enter the 2-digit month setting.
Enter the 2-digit day setting.
3. To exit, press [ ] when cursor is at the last digit, or
wait 10 seconds.
" B " "C " "D "
English Display: READY
Current time display
Time/date editing display
– 21 –