About Device Commands - ADT Security Manager 3000 User Manual

Your system may be set up so that it can control certain lights or other devices.
Some devices may be automatically turned on or off by the system.
You may be able to override automatically controlled devices using the
commands described below.
Some devices can be manually turned on or off using the commands described
below.
See your installer for a list of devices that may be set up for your system. A list
of these devices is provided at the back of this manual for you to fill out.
To Activate Devices:
+ [#] + [7] + 2-digit device number
(Security Code)
Devices associated with that device number activate.
To Deactivate Devices:
+ [#] + [8] + 2-digit device number
(Security Code)
Devices associated with that device number deactivate.
English Display: READY
– 25 –