Arming The System - ADT Security Manager 3000 User Manual
Adt safewatch pro 3000 security manager 3000 security system user's guide
Hide thumbs
Also See for Security Manager 3000:
- Installaton manual (88 pages) ,
- Battery replacement instructions (4 pages) ,
- Programming manual (16 pages)
Table of Contents
Advertisement
Used when you want to arm the system with persons staying inside (or if you have
pets that are moving throughout the premises).
The perimeter sensors are armed, but interior sensors are left disarmed.
Exit delay begins (you can leave through the entry/exit door, if desired).
An alarm sounds immediately if any protected perimeter window or non-entry/exit
door is opened.
You may otherwise move freely within the premises.
Persons entering later can enter through an entry/exit door without causing an
alarm, but they must disarm the system within the entry delay period to avoid
sounding an alarm.
Use Night-Stay mode to provide increased security while staying inside.
Arms same as Stay mode, but also arms pre-selected interior sensors (programmed
by your installer), while other interior sensors are left disarmed.
Persons entering later can use an entry/exit door but must not violate any of the
programmed interior zones to avoid sounding an alarm.
IMPORTANT: When Night-Stay mode is on, the selected interior zones are armed
and cause an alarm if anyone enters those areas (e.g., waking in the middle of the
night). To avoid sounding an alarm, you must disarm the system before any
activity takes place in those interior zones.
Used when staying inside and do not expect anyone to use an entry/exit door.
Arms same as Stay mode.
An alarm sounds immediately if any protected perimeter window or any door is
opened, including entry/exit doors.
IMPORTANT: Arming the system in this mode greatly increases the chance of
false alarms. Use extreme care in selecting this mode of arming.
Used when nobody will be staying inside (including pets).
The entire system (interior and perimeter) is armed.
Exit delay begins letting you leave through the entry/exit door.
An alarm sounds if a protected window or any door is opened, or if any movement
is detected inside your premises.
You can reenter through an entry/exit door without causing an alarm, but you
must disarm the system within the entry delay period to avoid sounding an alarm.
– 14 –
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Security Manager 3000 and is the answer not in the manual?
Questions and answers
How do I disarm with code?
To disarm the ADT Security Manager 3000, enter the security code on the touchpad. This will silence both the touchpad and external sounders if an alarm is active.
This answer is automatically generated