Accessing Other Partitions (Goto Command And Multi-Partition Arming); About Accessing Partitions - ADT Security Manager 3000 User Manual

Each touchpad is assigned a default partition for display purposes, and will show only
that partition's information.
The following table shows the relationship of the touchpads in each partition when
system is armed and disarmed.
PARTITION 1
Arming
State
Disarmed
Condition 1
Condition 2 Disarmed Partition 1 and
Condition 3
Armed
Armed
Condition 4
When both partitions are disarmed, the touchpad in each partition displays zone
status for its partition only. The common zone touchpad shows the status in that
zone only. See Condition 1 above.
When partition 1 is disarmed and partition 2 is armed, the touchpad in partition 1
shows the status of partition 1 and the common zone. Partition 2 will display the
status of partition 2 only. See Condition 2 above.
When partition 1 is armed and partition 2 is disarmed, the touchpad in partition 1
shows the status of partition 1 only. Partition 2 will display the status of partition
2 and the common zone. See Condition 3 above.
As long as any one of the two partitions is disarmed, the common zone will always
be disarmed. The common zone will be armed only when both partition 1 and 2 are
armed. See Condition 4 above.
– 30 –
If the user is authorized, a touchpad in one partition can be used to perform
system functions in the other partition by using the GOTO command. Refer to
the GOTO section.
If the user is authorized, that user can arm other partitions. Refer to the Multi-
Partition Arming section.
Touchpad Arming
Status
Partition 1 Disarmed
Only
Armed
Common Zone
Partition 1 Disarmed Partition 2 and
Only
Partition 1 Armed
Only
PARTITION 2
Touchpad
State Status
Partition 2
Only
Partition 2
Only
Common Zone
Partition 2
Only
COMMON ZONE
(LOBBY, etc.)
Arming Touchpad
State Status
Disarmed Common Zone
Only
Disarmed Common Zone
Only
Disarmed Common Zone
Only
Armed Common Zone
Only