Summary Of Audible/Visual Notifications - ADT Security Manager 3000 User Manual

SOUND CAUSE
LOUD, FIRE ALARM
INTERRUPTED *
Touchpad & Ext.
LOUD, BURGLARY/AUDIBLE
CONTINUOUS *
EMERGENCY ALARM
Touchpad & Ext.
ONE SHORT BEEP a. SYSTEM DISARM
(not repeated)
b. SYSTEM ARMING ATTEMPT
Touchpad only
c. BYPASS VERIFY
ONE SHORT BEEP a. SYSTEM IS IN TEST MODE
(once every 40 secs)
b. LOW BATTERY AT A
Touchpad only
TWO SHORT BEEPS ARM AWAY
Touchpad only
THREE SHORT a. ARM STAY, NIGHT-STAY, OR
BEEPS
Touchpad only
b. ZONE OPENED WITH
RAPID BEEPING a. TROUBLE
Touchpad only
b. MEMORY OF ALARM
c. SYSTEM LOW BATTERY
d. EXT. SOUNDER WIRING FAIL
SLOW BEEPING
a. EXIT DELAY WARNING
Touchpad only
b. ENTRY DELAY WARNING
* If a bell is used as external sounder, fire alarm is pulsed ring; burglary/audible emergency is steady ring.
– 46 –
WITH AN OPEN ZONE.
TRANSMITTER
INSTANT
SYSTEM IN CHIME MODE.
DISPLAY
FIRE is displayed; zone number of zone in
alarm is displayed. If a fire alarm is manually
activated, zone number 95 will be displayed.
ALARM is displayed. Zone number of zone in
alarm is also displayed.
a. READY indicator light comes on.
b. Number of the open protection zone displayed.
c. Zone numbers of the bypassed protection
zones are displayed (one beep is heard for
each zone displayed). Subsequently, BYPASS
is displayed.
a. Opened zone numbers will appear.
b. BAT displayed with zone number of
transmitter.
AWAY is displayed. Red ARMED indicator is lit.
a. STAY or INSTANT is displayed. Red
ARMED indicator is lit.
b. CHIME displayed; zone number of open
protection zone will be displayed if the [ ]
key is pressed.
a. CHECK displayed. Zone number of troubled
protection zone is displayed.
b. FIRE or ALARM is displayed; zone number
of zone in alarm is displayed
c. BAT displayed with no zone ID number.
d. CHECK 70 is displayed.
a. AWAY is displayed.
b. Exceeding the entry delay time without
disarming causes alarm.