Using Panic Keys - ADT Security Manager 3000 User Manual

Your system may have been programmed to use special keys to manually activate
emergency (panic) functions as follows:
This Function
Silent Alarm
Audible Alarm
Personal Alarm
Fire Alarm
*All panic functions send signals to the Customer Care Center, if connected.
To active a Panic Function:
Press and hold down for at least 2 seconds whichever
lettered key on the touchpad has been programmed for
the desired emergency function.
OR
Press both keys of the assigned key pair at the same
time.
A
B
C
D
Lettered Panic Keys
See your installer and use the chart provided in the Features Programmed in Your
System section to note the functions that have been programmed for your system.
– 22 –
Sends this signal*
silent alarm
audible alarm
emergency alarm
fire alarm
READY
ARMED
1 2 3
OFF AWAY STAY
4 5 6
TEST BYPASS
7 8 9
INSTANT CODE CHECK
* 0 #
READY
6139-001-V0
With This Sounding...
no audible alarm or any visual display
indicating that a silent alarm has been
initiated.
a loud, steady alarm at touchpad(s)
and at any external sounders that
may be connected.
steady alarm sound at touchpad(s),
but not at external bells or sirens.
temporal (pulsing) sound at external
bells and sirens.
Typical Panic Display:
99 and ALARM
ARMED READY
PRESS BOTH KEYS
OF DESIRED PAIR
AT THE SAME TIME
1 2 3
OFF AWAY STAY
4 5 6
TEST BYPASS
ZONE 95
7 8 9
INSTANT CODE CHECK
* 0 #
READY
ZONE 99
Panic Key Pairs
English Display: READY
English Display:
ZONE 96
6139ADT-002-V0