Responding To Alarms; Viewing Current Alarms - ADT Focus 200 Plus User Manual

Responding to Alarms

During an alarm, your system's alarm annunciating devices (bell, siren,
lights, and/or operating panel, depending on the optional devices you
selected) will be activated. The operating panel and horns will sound an
intermittent tone (with a 5-second pause every 10 seconds) to audibly
annunciate a fire alarm and a steady tone to audibly annunciate a burglary
alarm.
BURGLARY NOTE: Do not enter the premises until police arrive. Have a
FIRE NOTE:
HOLDUP NOTE:

Viewing Current Alarms

During an alarm (excluding holdup, hostage and duress alarms), the
operating panel will display the current alarm by type and point description.
key available to let the police in.
If you are on the premises when an alarm occurs,
EVACUATE IMMEDIATELY.
During a holdup or hostage (duress) situation, try to
remain as calm as possible. All employees should be
instructed on the operation of holdup devices. Users
with ID codes should be instructed on the use of the
Ambush/Hostage and Duress features.
? 1 Fire Alarm
Smoke Detector
No Other Alarms
Continue
Quick Start (cont'd)
– 13 –