General Information - Hilti SC 70W‑A22 Operating Instructions Manual

ORIGINAL OPERATING INSTRUCTIONS
SC 70W-A22 cordless circular saw
It is essential that the operating instructions
are read before the power tool is operated for
the first time.
Always keep these operating instructions to-
gether with the power tool.
Ensure that the operating instructions are
with the power tool when it is given to other
persons.
Contents
1 General information
2 Safety instructions
3 Description
4 Accessories, consumables
5 Technical data
6 Before use
7 Operation
8 Care and maintenance
9 Troubleshooting
10 Disposal
11 Manufacturer's warranty - tools
12 EC declaration of conformity (original)
1 These numbers refer to the illustrations. You can
find the illustrations at the beginning of the operating
instructions.
In these operating instructions, the designation "the
power tool" always refers to the SC 70W-A22 cordless
circular saw.
Operating controls and indicators 1
Single-arm parallel guide (rip fence)
@
Cutting angle presets (22.5°, 45°, 50°)
;
Drive spindle lockbutton
=

1 General information

1.1 Safety notices and their meaning
DANGER
Draws attention to imminent danger that will lead to
serious bodily injury or fatality.
WARNING
Draws attention to a potentially dangerous situation that
could lead to serious personal injury or fatality.
Auxiliary grip
%
On / off switch
&
Switch-on interlock
(
Grip
)
Charge status and fault display (Li-ion battery)
+
Release buttons with additional function (charge
§
status display activation)
Battery
/
Clamping lever for cutting depth adjustment
:
Hexagon socket wrench
·
Small base plate
$
LED illumination
£
Front clamping lever for the parallel guide
Page |
Clamping lever for cutting angle adjustment
13
¡
Cutting depth scale
14
Q
Hose connector (chip deflector)
17
W
Guard
18
E
Pivoting guard operating lever
18
R
Rear clamping lever for the parallel guide (only with
19
T
large base plate)
20
Pivoting guard
21
Z
Drive spindle
22
U
Direction-of-rotation arrow
23
I
Twin-arm parallel guide (rip fence)
23
O
0°cutting line indicator
24
P
45°cutting line indicator
Ü
Cutting angle scale
[
Large base plate
]
Clamping screw
Æ
Clamping flange
º
Mounting flange
•
0°indicator on the base plate
A
1°- 50° indicator on the base plate
S
Guide rail adapter 2
Rear retaining lug
D
Front retaining lug
F
0° indicator
G
1°- 50° indicator
H
CAUTION
Draws attention to a potentially dangerous situation that
could lead to slight personal injury or damage to the
equipment or other property.
NOTE
Draws attention to an instruction or other useful informa-
tion.
en
13