Regulation Tag; Waste Electrical And Electronic Equipment (Weee) Directive - ITech IT8500+ Series Programming Manual

requirements for this instrument.
Environmental conditions
Operating temperature
Operating humidity
Storage temperature
Altitude
Pollution
Installation category

Regulation Tag

Waste Electrical and Electronic Equipment (WEEE)
Directive
Note
In order to ensure the accuracy of measurement, it is recommended to operate the
instrument half an hour after start-up.
Waste electrical and electronic equipment (WEEE)
directive, 2002/96/EC
The product complies with tag requirements of the
WEEE directive (2002/96/EC).
electronic equipment cannot be disposed of as ordinary
household waste.
Product Category
According to the equipment classification in Annex I of
the WEEE directive, this instrument belongs to the
"Monitoring" product.
If you want to return the unnecessary instrument,
please contact the nearest sales office of ITECH.
Copyright © ITECH Electronic Co., Ltd.
Requirement
0° C - 40° C
20% - 80% (non condensing)
-20° C - 70 ° C
≤2,000m
Grade 2 pollution
II
The CE tag shows that the product
complies with the provisions of all relevant
European laws (if the year is shown, it
indicates that the year when the design is
approved).
This instrument complies with the WEEE
directive (2002/96/EC) tag requirements.
This attached product tag shows that the
electrical/electronic product cannot be
discarded in household waste.
This symbol indicates that no danger will
happen or toxic substances will not leak or
cause damage in normal use within the
specified period. The service life of the product
is 10 years. The product can be used safely
within the environmental protection period;
otherwise, the product should be put into the
recycling system.
IT8500+ Programming Guide
This tag indicates that the
iii