Regulation Tag; Waste Electrical And Electronic Equipment (Weee) Directive - ITech IT6400 Series Programming Manual

Environmental conditions
Operating temperature
Operating humidity
Storage temperature
Altitude
Pollution
Installation category

Regulation tag

Waste electrical and electronic equipment (WEEE)
directive
Note
To make accurate measurements, allow the instrument to warm up for 30 min before
operation.
The CE mark indicates that the product complies with all
the relevant European legal directives. The specific year (if
any) affixed refers to the year when the design was
approved.
The instrument complies with the WEEE Directive
(2002/96/EC) marking requirement. This affixed product
label
electrical/electronic product in domestic household waste.
This symbol indicates the time period during which no
hazardous or toxic substances are expected to leak or
deteriorate during normal use. The expected service life of
the product is 10 years. The product can be used safely
during the 10-year Environment Friendly Use Period
(EFUP). Upon expiration of the EFUP, the product must be
immediately recycled.

Waste electrical and electronic equipment (WEEE) directive,

2002/96/EC
The product complies with tag requirements of the WEEE directive
(2002/96/EC).
cannot be disposed of as ordinary household waste.
Product Category
According to the equipment classification in Annex I of the WEEE
directive, this instrument belongs to the "Monitoring" product.
Copyright © Itech Electronic Co., Ltd.
Requirement
0°C - 40°C
0°C - 40°C
20% - 80% (non condensing)
-20°C - 70 °C
Operating up to 2,000 meters
Grade 2 pollution
II
indicates that you
This tag indicates that the electronic equipment
IT6400 Programming Guide
must not discard the
iii