[Source:]Power[:Level][:Immediate][:Amplitude] <Nrf; [Source:]Power[:Level][:Immediate][:Amplitude] - ITech IT8500+ Series Programming Manual

*RST Value
MAXimum

[SOURce:]POWer[:LEVel][:IMMediate][:AMPLitude]

<NRf+>
This command is used to set the power setting in CP mode.
Command Syntax
[SOURce:]POWer[:LEVel][:IMMediate][:AMPLitude] <NRf+>
Parameters
MIN~MAX|MINimum|MAXimum
Unit
W
*RST Value
MINimum
Examples
POW 10
Query Syntax
[SOURce:]POWer[:LEVel][:IMMediate][:AMPLitude]?
Returned Parameters
<NR2>
[SOURce:]POWer[:LEVel][:IMMediate][:AMPLitude]?
This command is used to query the power setting in CP mode.
Command Syntax
[SOURce:]POWer[:LEVel][:IMMediate][:AMPLitude]?
Parameters
None
Unit
W
*RST Value
MINimum
Copyright © ITECH Electronic Co., Ltd.
Input Settings
35