Status:operation:condition; Status:operation:enable <Nrf - ITech IT8500+ Series Programming Manual

STATus:OPERation:CONDition?

This query returns the value of operation condition register. That is a read-only
register that holds the real-time (unlatched) operational status of the electronic
load.
Query Syntax
STATus:OPERation:CONDition?
Parameters
None
Examples
STAT:OPER:COND?
Returned Parameters
<NR1>
Related Commands
STAT:QUES:COND?
STATus:OPERation:ENABle <NRf+>
The command is used to set the value of operations enable register. This
register is a mask for enabling specific bits from the Operation Event register to
set the operation summary bit (OPER) of the Status Byte register. The
operation summary bit is the logical OR of all enabled Operation Event register
bits.
Command Syntax
STATus:OPERation:ENABle <NRf+>
Parameters
0 to 65535
Default value
0
Examples
STAT:OPER:ENAB 32
Query Syntax
STATus:OPERation:ENABle?
Returned Parameters
<NR1>
Related Parameters
STAT:OPER?
Copyright © ITECH Electronic Co., Ltd.
Status Commands
20