Product Safety; Scope Of Delivery; Installation; Incoming Acceptance, Transport, Storage - Automation Direct ProSense LPM1 Series Operating Instructions Manual

2.5 Product safety

This measuring device is designed in accordance with good engineering
practice to meet state-of-the-art safety requirements, has been tested, and
left the factory in a condition in which it is safe to operate.
It meets general safety standards and legal requirements. It also complies
with the EC directives listed in the device-specific EC Declaration of
Conformity. Confirmed by the affixing of the CE mark to the device.
The measuring devices have also been tested by UL or CSA. See "Technical
data" section.

3 Scope of Delivery

The scope of delivery of the device comprises:
• Panel mounted device (LPM1-A-PNL)
– Process display unit
– Operating Instructions
– Fastening fixtures
• Field mounted device (LPM1-A-ENC, LPM1-A-HAZ)
– Process display unit
– Operating Instructions
– CSA Control Drawing (LPM1-A-HAZ only)

4 Installation

4.1 Incoming acceptance, transport, storage

Compliance with the permitted environmental and storage conditions is
mandatory. Precise specifications for this are provided in the "Technical
data section".
4.1.1 Incoming acceptance
On receipt of the goods, check the following points:
• Is the packaging or the content damaged?
• Is the delivery complete? Compare the scope of delivery against the
information on your order form.
4.1.2 Transport and storage
Please note the following:
Operating Instructions - ProSense LPM1 Series Meter
LPM1 Series Meter Rev. 1
71487579
7