Main Features - Agilent Technologies 1200 Series User Manual

1
Introduction to the Column Compartment

Main Features

Main Features
The Agilent 1200 Series thermostatted column compartments are stackable
temperature-controlled column compartments for LC. They are available as
standalone modules or as a component of a Agilent 1200 Series system. They
are used for heating and cooling to meet extreme requirements of retention
time reproducibility.
The main features are:
• Peltier heating and cooling from 10 degrees below ambient up to
• holds up to three 30-cm columns and optimized design gives minimum dead
• two independently programmable heat exchangers contribute volumes of
• G1316B SL features additional heating and cooling devices for low flow
• G1316B SL and G1316C SL Plus can be supplemented by a kit to install a
• electronic column-identification module as standard for GLP
• optional high-quality Rheodyne
For specifications, see
10
80 °C(G1316A) or 100 °C (G1316B SL/G1316C SL Plus) with high heating
and cooling speeds for maximum application flexibility and stability,
volumes and maximum efficiency,
only 3 and 6 µl,
rates, which reduce the risk of additional dispersion,
small heat-exchanger with 1.6 µl delay volume to reduce the delay volume.
In additon a cooling device with 1.5 µl is available,
documentation of column type, and major column parameters,
stator-face assemblies for prolonged lifetime.
®
column switching valves with ceramic
"Performance Specifications" on page 28.
1200 Series TCC User Manual