Changing Column Identification Tags - Agilent Technologies 1200 Series User Manual

Changing Column Identification Tags

The column compartment is equipped with an column-identification system,
that stores column specific information. Two identification antennas are
incorporated in the heat exchanger assemblies.
Figure 21
When If column is used on the opposite heat exchanger or a tag is added to a new column.
Parts required #
1
1 The identification tag can be easily removed from the column.
2 The tag needs to be placed differently, depending on whether the column is
1200 Series TCC User Manual
Column-Identification System
Part number Description
5062-8588 Column identification tag, pack of 3
installed at the left or right heat exchanger, see
Figure 16 on page 50. The Agilent logo should always be at front.
When correctly placed on the heat exchanger, the distance between tag and
antenna is 1–2 mm. This is the optimum distance for proper function.

Changing Column Identification Tags

Figure 15 on page 49 and
7
Maintenance
77