Adding Heater And Cooling Devices (G1316B Sl/G1316C Sl Plus) - Agilent Technologies 1200 Series User Manual

7
Maintenance

Adding Heater and Cooling Devices (G1316B SL/G1316C SL Plus)

Adding Heater and Cooling Devices
(G1316B SL/G1316C SL Plus)
The addtional heater and cooling devices can be arranged in the G1316B SL in
various locations depending on the application needs . Some examples are
shown below.
Figure 25
If the additional heater and cooling devices are used as shown above, the column
N O T E
identification system cannot be used. If the column identification system is required, fix the
heater and cooling devices in the upper or lower locations or fix them right/left of the
current location.
The heater and cooling devices are mounted on a carrier that can be fitted to
the left and/or right heat exchangers.
82
Arrangements of Heater and Cooling Devices (G1316B SL/G1316C SL Plus)
1200 Series TCC User Manual