Placing Columns
Column-Identification Tag
When correctly placed on the heat exchanger, the distance between the
column-identification tag and antenna is 1–2 mm. This is the optimum
distance for proper function. The identification tag can be easily removed from
the column.
For columns with small diameter, a cable tie wrap should be used to fix the column
N O T E
identification tag to the column. Assure that the tie wrap does not block the front cover.
The tag needs to be placed differently, depending on whether the column is installed at the
N O T E
left or right heat exchanger, see
logo should always be at front.
Figure 15
1200 Series TCC User Manual
Figure 15
Column-Identification Tag for Left Heat Exchanger
Installing the Column Compartment
on page 49 and
Figure 16
3
Placing Columns
on page 50. The Agilent
49